Check out our White Paper Series!
A complete library of helpful advice and survival guides for every aspect of system monitoring and control.
1-800-693-0351
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.
Reserve Your Seat Today
The FDO 1000 Order-Wire brings maintenance communications into the 21st century with features and advantages that come only with microprocessor control.
DTMF Selective Signaling
The DPS FDO 1000 Order-Wire uses the on-board microprocessor to synthesize and decode DTMF signaling tones. Optional features like privacy, all call and external speaker muting are all programmable.
Compatibility
The FDO 1000 can be programmed to interface with many existing DTMF Signaling Order-Wire networks. It can also be used without signaling in a "hoot-n-holler" application by adding the accessory monitor speaker and 4-wire phone. The FDO 1000 includes a 4-Way passive bridge and level matching pads for +7 / -16 dBm channel levels. The bridge can also be bypassed for direct interface at the order-wire's active VF ports. Terminations can be strapped in for any unused ports.
Optional Data Port Expansion
An Auxiliary Card slot on the FDO 1000 Order-Wire will accept expansion cards, similar to the KDA-series Alarm Remotes. Expansion cards will be offered in the future, and could include additional Order-Wire channels, alarm expansion cards and base-band or digital interfaces. (See Order Wire Network diagram).
Download Configuration
Order-Wire options and configuration of the alarm and control points is accomplished on a personal computer running T/FDO1000 software. The configuration file is downloaded to the FDO 1000's processor via a craft port on the front on the unit.
LED Indicators
The FDO 1000 includes alarm and control status LED's on the front panel. Other LED's indicate order-wire off-hook, incoming call ringing and channel busy.
One-Rack Unit
The FDO 1000 requires only one rack unit (1-3/4") of vertical space in a 19" or 23" rack.
Four-Wire Phone
Voice communications and out-dialing can occur at a 4-wire telephone, mounted near the FDO 1000. A wall-mount type phone is available with the FDO 1000, but other style phones can be used, as long as they are converted to 4-wire operation.
Call Buzzer
A buzzer in the FDO 1000 announces incoming calls.
FDO 1000 Order Wire Network
A buzzer in the FDO 1000 announces incoming calls.
| Specifications | |
|---|---|
| VF levels, Direct: | -16 to +7 dBm |
| VF levels, Bridge: | -16 dBm Transmit +7 dBm Receive |
| Bridge Type: | 4-Way / 4-Wire, Passive |
| Bridge Return Loss: | > 40 dB |
| Bridge Trans-Hybrid Loss: | >56 dB |
| Frequency Range: | 300 to 3000 Hz |
| Signaling: | Standard DTMF |
| All Call: | Programmable option, *** or ### |
| Station Call: | 3 digit, switch programmable |
| Physical Size: | 1-3/4" X 19" X 12" case |
| Weight: | 3 lbs |
| Voltage Range: | Option 0 = -18 to -72 VDC Option 2 = -18 to -36 VDC Option 4 = -36 to -72 VDC |
| Current: | 500 mA |
| Off-hook indication: | C-form relay, to -Batt or Gnd |
| DESCRIPTION | |
|---|---|
| Model Number | |
| BasicVF Order-Wire Terminal | FDO-1000-10A-V0 |
| Basic VF Order-Wire Terminal - equipped with 8 Alarm / 2 control alarm | FDO-1080-10A-V0 |
| FDO 1001 - off-net package | FDO-1001 series |
| FDO 1002 - Three channel rack-mount panel with dial, handset, hookswitch and speaker | FDO-1002 series |
| ACCESSORIES | |
| External speaker with level control, mounts on wall or rack side rail | FDO-1200-10A-V0 |
| External speaker with level control, on a 19" rack-mount panel | FDO-1201-10A-V0 |
| External handset and hookswitch with headset jacks, mounts on wall or rack side rail | FDO-1300-10A-00 |
| Wall phone with DTMF dial | FDO-1301-10A-00 |
