Check out our White Paper Series!
A complete library of helpful advice and survival guides for every aspect of system monitoring and control.
1-800-693-0351
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.
Reserve Your Seat TodayHow To Retrofit Diesel Tank Level, Leak, And Generator Monitoring At Existing Facilities
DPS Telecom explains how to retrofit electronic diesel tank level monitoring, scale readings, set thresholds, and add generator status and leak alarms.
Andrew Erickson
October 13, 2026
How Rail Integrators Standardize On One Rack And Cabinet Monitoring Unit
DPS Telecom explains how rail integrators standardize cabinet monitoring with DIN rail RTUs, SNMPv3, door sensing, and daisy-chained environmental sensors.
Andrew Erickson
October 12, 2026
Verifying Generator Exercise Runs And Outage Starts With An Independent Record
DPS Telecom explains how to verify generator exercise runs and outage starts with AC sensing, Modbus, derived alarms, and timestamped RTU event history.
Andrew Erickson
October 6, 2026
Best RTU for Temperature and HVAC Monitoring
Which remote telemetry unit handles temperature and HVAC monitoring best? Our engineers cover analog sensing, rate of change, airflow, and sizing for growth.
Andrew Erickson
October 6, 2026
Why Your Remote Site Alarms Should Notify On Clears, Not Just On Failures
DPS Telecom explains why remote site alarms should notify on clears as well as failures, and how to set up email, door, power, and generator points.
Andrew Erickson
October 5, 2026
Monitoring Every Cell Without Wiring Every Cell
DPS Telecom explains how wireless per-cell sensors monitor large DC battery banks without per-cell wiring, and how to feed the data to your own analytics.
Andrew Erickson
September 30, 2026
What Railroads Need From an RTU: Isolation, Fail-Safe Relays, and Security
DPS Telecom explains ground isolation, fail-safe remote power cycling, and security hardening for RTUs deployed across railroad and transit wayside sites.
Andrew Erickson
September 28, 2026
Right-Sized Alarm Monitoring When Your Radio System Stands Alone
DPS Telecom explains how to monitor a small, isolated public safety radio system with a compact -48 VDC alarm master, SNMP device support, and Modbus.
Andrew Erickson
September 23, 2026
Getting More Than Raw Points From Your Site Alarms
DPS Telecom explains how derived alarm logic, runtime accumulators, and analog fuel sensing reduce nuisance alarms and support generator compliance.
Andrew Erickson
September 21, 2026
Replacing 25 Legacy Alarm Remotes Without Rewiring Every Site
DPS Telecom explains how to standardize RTUs across municipal sites, reuse existing 66-block wiring, and give each department role-based alarm access.
Andrew Erickson
September 15, 2026
