Download our free SNMP White Paper. Featuring SNMP Expert Marshall DenHartog.
This guidebook has been created to give you the information you need to successfully implement SNMP-based alarm monitoring in your network.
1-800-693-0351
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.
Reserve Your Seat Today
The NetDog G2 provides a reliable means of monitoring generator dry contact alarms. The NetDog G2 is our smallest RTU that has the ability to report over IP to your SolarWinds SNMP Manager or T/Mon NOC.
The NetDog G2 also features direct email ability as well as a POTS modem for alternative path reporting to a pager in case of LAN failure. Also, the NetDog is surface-mountable and features a built-in terminal strip for easier alarm termination.
The new NetDog 82IP (G2) has a capacity of 8 discrete inputs, and 2 control relays. The NetDog 82IP's 8 discrete alarm inputs can accept any contact closure type of event, such as door switches, fuse alarms, major and minor equipment alarms, high temperature alarms and tower light monitors.
We have an option for the NetDog that features four Analog Ports with an external sensor probe. The 2 control relay outputs can be used for a number of functions including operating standby equipment, door locks or emergency lighting. The NetDog 82IP's built-in 33.6 modem will not only dial to a pager directly to report a fault or alarm, but once alerted, the staff can dial into the NetDog 82IP using the telnet session and control up to 2 different pieces of equipment i.e. back up generator, turning lights on etc. A trap will also be sent to your SolarWinds SNMP manager.
The NetDog 82IP is easy to install, with connectors for all ports and captive screw-lug terminals for alarm and control wiring. The unit mounts on any vertical flat surface, or it can be desktop mounted. If needed, we also carry mounting panels for equipment rack mounting. The built in 33.6 modem is a great way to get dial up access to this equipment should your primary transport fail. The NetDog 82IP is programmed using any generic TTY terminal.
The easy-to-use menus enable you to quickly set up your NetDog with your pager number, point descriptions and additional options. Programming can also be done using your LAN or via dial-up modem. The entire configuration is saved on the NetDog where it remains secure through power outages in non-volatile RAM. The NetDog 82IP can also ping up to 32 network elements which will notify Morgan Consultants if Network Elements that are key to your operations are not reachable.
If an element fails to respond to successive pings, or if something is amiss with the environmental controls, the NetDog 82IP notifies personnel using a variety of methods with a complete status message, including sending an SNMP trap over IP to your SolarWinds SNMP Manager and/or a text message to your pager. The integrated Web Browser interface will make for easy and convenient alarm management and unit configuration via corporate LAN/WAN or the Internet. The user-friendly interface allows complete access to all the functions of the unit and enables the user to quickly set up alarm point descriptions, view alarm status, issue controls, and configure paging information, as well as additional options.
