| |
Proudly made in the United States of America!
Pricing
4284

Get a Live Demo

You need to see DPS gear in action. Get a live demo with our engineers.

NetGuardian DIN DemoGet a Demo

Get the SNMP Troubleshooting White Paper

Finding and solving problems in your SNMP implementation can be tough.

This guide helps you identify and solve SNMP issues.

SNMP Troubleshooting White PaperDownload White Paper

DPS is here to help.

1-800-693-0351

Have a specific question? Ask our team of expert engineers and get a specific answer!

Ask an Expert DPS TelecomGet a Fast Answer!

Learn the Easy Way

Sign up for the next DPS Factory Training!

DPS Factory Training

Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.

Reserve Your Seat Today

How to Verify That Your SNMP Device is Sending Traps

Previous Page: Practical guide to SNMP Troubleshooting
PDFDownload White Paper

If traps aren't being properly sent from your SNMP device, they obviously won't make it to their destinations. Your SNMP device may have a debug mode option. Once in debug mode, you will see a display of traps being sent out by the device. By creating events at the site and watching the debug-mode trap display, you can determine whether traps are trying to be sent. Remember that you may need to reconfigure the remote to send a trap in response to the event you're generating. DPS Telecom remotes can be configured to send traps on a point-by-point basis.

Another testing method is to look for a coldstart trap following a bootup. Power cycle your device and watch for the trap that, on many SNMP devices, is sent when booting. Check your device documentation to ensure that you don't waste time looking for a coldstart trap that your device isn't designed to send.

If traps are not being sent, you have an issue with your SNMP device. If they are being sent, check your network setup, firewalls, MIB files, and trap formats using the other sections of this guide.

Easy SNMP debugging with the NetGuardian

NetGuardian 832A

If you have a NetGuardian RTU, you can easily verify that it is sending traps correctly:

  1. Open a Telnet connection to the NetGuardian in HyperTerminal or other Telnet-capable software.
  2. Enter your NetGuardian password to log in.
  3. Press 'd' to reach the debug menu.
  4. Press 'r' to enter Report Mode.
  5. Generate an event at the site that would normally trigger an SNMPtrap.
  6. Watch for SNMP traps to be reported in your Telnet session. If traps are properly shown in Report Mode, the problem is not with your NetGuardian RTU.

Tech Support

The NetGuardian, the T/Mon LNX, and every other DPS Telecom product includes comprehensive technical support. If you've purchased a DPS product and are encountering SNMP issues, contact DPS Tech Support.

At DPS Telecom, the representative who answers your call isn't an intern reading from a script. DPS Tech Support representatives are engineers who contribute to product development. And, if your problem requires additional expertise, the DPS Engineering Department that designed your product is right down the hall.


Next Page: Upgrade SNMP
PDFDownload White Paper